RT1900ac Release Notes

Oldal elérési linkje

Version: 1.0.2-6022

(2016/03/03)

Fixed Issues

1. Added the “TCP/UDP” option to Port Forwarding to set TCP and UDP rules at the same time.
2. Allows setting the DHCP range for guest networks.
3. Re-defined schedule behavior in Parental Control: When Internet access is blocked on a device, you can still use this device to access SRM and other devices in the local network.
4. Re-defined “banned” in Traffic Control: When a device is banned, you cannot use this device to access the Internet or SRM, but you can still access other devices in the local network.
5. UPnP rules will remain after an SRM reboot.
6. Enhanced SRM security (CVE-2015-7547, CVE-2015-3197 CVE-2015-5621, CVE-2016-0777, CVE-2016-0778).
7. Fixed an issue where SRM could not find DNS servers when PPPoE was selected as the connection type after a soft reset of the Synology Router (i.e., pressing the reset button for four seconds).
8. Minor bug fixes.

Version: 1.0.1-6007 Update 2

(2016/01/26)

Fixed Issues

1. Enhanced security for SSH connections (CVE-2016-0777 and CVE-2016-0778).
2. Fixed an issue where FTP transmission through PPPoE may not work when firewall rules are in place.

Version: 1.0.1-6007 Update 1

(2016/01/19)

Fixed Issues

1. Fixed an issue where the Contact Support page in Support Center could not be displayed correctly.
2. Fixed an issue where newly added port forwarding rules might disappear if not saved immediately.
3. Fixed an issue where reconnecting to PPPoE would periodically cause a slight increase in memory consumption.
4. Fixed an issue where configuring ISP settings with a DHCP Client ID might fail.
5. Fixed an issue where setting MAC Filter rules might cause SRM to malfunction when Wi-Fi Security Level is set as WEP.

Version: 1.0.1-6007

(2016/01/12)

Fixed Issues

1. Supports VLAN tagging used by Internet service providers, including Internet/IPTV/VoIP tagging.
2. Implemented functional limits for rules and device number in SRM.
3. Supports Layer 7 QoS for guest network devices.
4. Displays guest network devices in Status page device list.
5. Fixed an issue where SRM first time installation might fail when selecting router mode via a mobile device.
6. Fixed an issue where restoring SRM settings might result in Parental Control rules disappearing.
7. Fixed an issue where restoring SRM settings might result in errors when applying Beamforming settings.
8. Fixed an issue where Parental Control schedules might have no effect on IPv6 devices.
9. Fixed an issue where iOS devices might not be able to play music through AirPlay.
10. Minor bug fixes.

Version: 1.0-5781 Update 3

(2015/12/22)

Fixed Issues

1. Enhanced PPPoE performance in SRM.

Version: 1.0-5781 Update 2

(2015/12/15)

Fixed Issues

1. Fixed an issue where IPv6 setup might fail.
2. Fixed an issue where devices in the local network might fail to access the Internet through PPPoE while SRM is in Wireless AP mode.
3. Fixed an issue where Wi-Fi speed might drop when the Synology Router is connected to certain British ISPs.
4. Fixed an issue where devices in guest networks might fail to access the Internet while DMZ is enabled. Once you have updated SRM, please disable and then re-enable DMZ to make it work properly.
5. Fixed an issue where devices in the local network might fail to access some websites when the Synology Router is connected to certain British ISPs.

Version: 1.0-5781 Update 1

(2015/11/25)

Fixed Issues

1. Supports setting up private port range for port forwarding.
2. Updated the available 5GHz Wi-Fi channels of some countries.
3. Enhanced Wi-Fi transmission performance of some countries.
4. Fixed an issue where transmissions between LAN, 2.4GHz Wi-Fi, and 5GHz Wi-Fi might fail.
5. Fixed an issue where Wake-on-LAN over QuickConnect might fail.
6. Fixed an issue where SRM might not get IPv6 prefix.
7. Fixed an issue where the UPnP client list might be erased.
8. Fixed an issue where Wi-Fi speed might drop while connecting to some European ISP vendors.

Version: 1.0-5781

(2015/11/02)

Fixed Issues

1. Fixed an issue where firewall could not block LAN devices from accessing WAN.
2. Fixed an issue where SRM could not be accessed through router.synology.com in some situations.
3. Fixed an issue where SRM could not immediately get IPv6 prefix.
4. Fixed an issue where Wi-Fi SSID disappeared in rare instances.
5. SRM now allows you to configure IPv4 address priority over IPv6 in Ping.
6. SRM will now detect if LAN and WAN subnets are the same to avoid connection failure due to subnet overlap.
7. SRM will now show the current operation channel if Auto is selected for the Channel option.
8. Adjusted transmission power in channel 2 and 10 of Wi-Fi 2.4GHz.
9. Updated the Web-filter database in Parental Control.

Version: 1.0-5766

(2015/10/01)

Change log

• N/A. (This is the initial release of RT1900ac)